Features:
The 5MCY14-1B axial piston pump is equipped with a valve plate and a cylinde block. In order to reduce the friction between the piston shoe and the wear plate, as well as the friction between the cylinder block and the valve plate, the product is designed with a hydrostatic balance system. This design provides the product with longer service life. Also, the product has other features, suct as simple structure, high efficient, light weight, and strong self-suction capability.
Precautions for use of this series of piston pump:
1, the oil inlet and outlet of the oil piston pump must be installed according to the combination of gasket, pipe joint after good coated with a layer of butter, this can prevent air into.
2, before use must back oil hole full of oil, otherwise the pump will be short of oil and instant wear.
3. After the oil is injected, the pipe shall be idled for 10 minutes before the pressure is started, so as to reduce the residual air volume in the pump and pipe.
4, the oil inlet of the oil pump can not be installed with filter screen or filter element, which will cause the oil pump suction insufficient damage. The strainer can be installed in the oil tank or in the oil outlet.
Note: the model with the letter F is inverted, no F is forward. Need to reverse the purchase, please specify, the price is the same.
Pressure switch
Chinese
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese
Korean
Arabic
Russian