 |
Products list |
 |
|
| |
|
|
|
|
Hydraulic grade pressure compensation axial piston pump 25MYCY14-1B |
|
| Product name : Hydraulic grade pressure compensation axial piston pump 25MYCY14-1B |
| Item : |
| Details : |
Hydraulic grade pressure compensation axial piston pump 25MYCY14-1B
How to order:
Specification:
| Model No |
Pressure Mpa |
Delivery ml/r |
Rated speed r/min |
Flow l/min |
Power KW |
Max Torque N.M |
Weight kg |
| 1.25CY14-1B |
32
|
1.25 |
1500
|
1.25 |
0.9 |
8.7 |
4.5 |
| 2.5MYCY14-1B |
2.5 |
2.5 |
1.43 |
17.5 |
4.5～7.2 |
| 5MYCY14-1B |
5 |
5 |
2.9 |
27.4 |
10 |
| 10MYCY14-1B |
10 |
10 |
5.5 |
54.6 |
16.1～24.9 |
| 25MYCY14-1B |
25 |
25 |
13.7 |
134.9 |
28.2～41 |
| 32MYCY14-1B |
32 |
32 |
11.4 |
108.5 |
35 |
| 40MYCY14-1B |
40 |
40 |
20.7 |
197.5 |
40 |
| 63MYCY14-1B |
63 |
63 |
34.5 |
339.9 |
56～74 |
| 80MYCY14-1B |
80 |
80 |
29.2 |
278.8 |
63 |
| 160MYCY14-1B |
160 |
160 |
89.1 |
880.3 |
138～168 |
| 250MYCY14-1B |
250 |
250 |
136.6 |
1272.4 |
227 |
| 400MYCY14-1B |
400 |
400 |
138 |
1906.0 |
230 |
Features:
The 25MYCY14-1B axial piston pump is equipped with a valve plate and a cylinde block. In order to reduce the friction between the piston shoe and the wear plate, as well as the friction between the cylinder block and the valve plate, the product is designed with a hydrostatic balance system. This design provides the product with longer service life. Also, the product has other features, suct as simple structure, high efficient, light weight, and strong self-suction capability.
Start of piston pump and motor: check whether the regulating handwheel and handle in the system are normal before starting. Whether the position of the electrical switch and the travel block is firm, etc., then it can start up without load first, and slowly pressurize after no load for 15 minutes. Under normal circumstances, it is not appropriate to frequently open and close the motor during the working process. When starting at low temperature, it is necessary to adjust the rated pressure of the overflow valve to 1/2, and then start the motor repeatedly to make the overflow valve overflow completely and warm the hydraulic oil until the temperature rises to about 20C before putting it into use. (the one with heater can be directly heated up).
The equipment should work under the rated pressure, otherwise it will easily lead to overheating or even overload of the motor and damage other components. * think carefully!!
|
 |
←[Previous : ]
[Next : ]→
|
|
Pressure switch
Chinese
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese
Korean
Arabic
Russian