Heat exchanger industrial air cooler AH1680TL-AC220V

Significant achievements in water saving; The evaporation of the water film of the outer skin of the pipe was slowed down, the water film of the outer skin of the pipe was rapidly evaporated, and the operation cost was lower. The energy-saving water-film type air cooler is applied to the closed-circuit circulation of soft water in blast furnace, continuous casting and rolling mould, the closed-circuit circulation of soft water in heating furnace, blower, electromechanical, rolling machine and other equipment in metallurgical industry. Application:

 

 

The energy-saving water film type air cooler is the necessary equipment for the soft water closed circulation cooling system.

 

 

When the equipment is in operation, the air is deflected from the lower bundle to the upper bundle by the fan.

 

 

In addition to relying on sensible heat communication between water film and air flow, energy-saving water-film type air cooler greatly improves the heat transfer compliance of the group. Ammonia gas condensation and condenser cooling water system of air conditioning system in the refrigeration plant; The corrosion of cooling water on the cooling wall was calculated. This is mainly because water has a high latent heat of vaporization (the latent heat of vaporization of water at one atmosphere pressure is 2,386). As the main equipment in the system, energy-saving water film type air cooler has the characteristics of saving water, saving energy and achieving good cooling performance. Axial flow fan will saturate the wet air and make it through the mist catcher located above the water spraying system, vigorously advocate energy saving, water saving condition, in terms of the layout of the whole process, so strengthen the pipe heat transfer. Its mission is to tilt the upper part of the pipe bundle to the lower part of the spray cooling water. In the current national water and energy shortage, energy-saving water film type air cooler (also known as evaporative air cooler) is a new type of high-efficiency and energy-saving cooling equipment that integrates water cooling with air cooling, heat transfer and mass transfer. At the same time, the normal temperature deoxygenation equipment is added to the system, and the energy-saving water-film type air cooler has much needed economic implications and great social benefits. A thin water film is formed in the outer skin of the heat transfer pipe. Soft water movement in the tube, the equipment used in petrochemical, metallurgy, electric power industry has been very popular, in metallurgy, electric power, oil refining, chemical, refrigeration, light high energy consumption, water consumption industries, such as in the running process of the air, cooling water pipe, the pipe outer skin deep water film evaporation air across the tube bundle and close to the saturated humidity greatly increased after shape, for axial flow fan is located in the upper device, so as to achieve the purpose of the soft water cooling tube. The purpose of cooling the soft water in the pipe was achieved. Power industry steam turbine cat claw, main valve, zhonglian door, water pump seat, refinery chemical plant low temperature level oil cooling, all kinds of tower top oil and gas condensation cooling, steam and other singing medium condensation cooling. The air moves from the bottom up, and the soft water closed circulation cooling system has obvious advantages over the old cooling tower open circuit circulation cooling system: safe and reliable operation; Cooling water and air flow in the downstream mode.