 |
Products list |
 |
|
| |
|
|
|
|
Pressure switch installation method in different medium |
| Author : William Date : 2014/8/28 21:33:41 |
Pressure switch installation method in different medium
Due to the diversity of the measured medium, in order to promote the efficiency of work, the installation method of pressure switch must be with the nature of the measured medium with different installation method:
A, measurement of liquid when installation method
Pressure switch to measure liquid medium, in order to avoid the gas accumulated within the pipeline, pressure switch shell shall be installed in the top down system equipment and can guarantee the liquid pipeline.This installation method not only ensures the accuracy of the measurement results, and provides the pipes and pressure switch clean is convenient.
Note: if the measured medium is liquid slurry, the pressure switch should be installed vertically, facilitate medium flow up, prevent slurry liquid accumulation within the pipes.
B, the installation method of measuring gas
When measuring gas pressure switch installation method and measurement of the liquid on the contrary, in order to avoid the pressure switch inside filled with liquid, the most low pressure switch should be installed in the pipeline and the shell should be installed on the surface, to prevent some condensate liquid residue inside the pressure switch, etc.
The above: Analysing delay of pressure switch
|
|
Pressure switch
Chinese
Deutsch
Espanol
Francais
Italiano
Portugues
Japanese
Korean
Arabic
Russian