Pressure relay's model is introduced

Pressure relay's model is introduced

 

Superposition type pressure relay MJCS - 02, 03

Hidden in this valve, micro switch, induction from hydraulic system pressure conveying electrical signals, to the electromagnetic directional valve or electric motor to make it change switch directions or warnings, closed circuit, in order to achieve the effect of system protection

Superposition type pressure relay

Model Rated maximum Rated pressure Max Weight Weight (kg)

MJCS - 2 p, 2 a, 2 b / 3 p. 3 a. 3 b 30-210 kg/cm2 1.65/2.55 210 kg/cm2

MJCS - 2 pl, 2 al, 2 bl / 3 pl. 3 al. 3 bl 15 to 60 kg/cm2 1.65/2.55 210 kg/cm2

MJCS PLL - 2, 2, 2, all the BLL / 3 PLL. 3 all. 3 the BLL 5-60 kg/cm2 1.65/2.55 70 kg/cm2

Pressure relay JCS is introduced

Pressure relay as part of the valve, the valve inside micro switch, induction from hydraulic system pressure conveying electrical signals, to the electromagnetic directional valve or electric motor to change the direction of switch or warning, closed circuit, in order to achieve the effect of system protection.

Pressure relay JCS series models:

Model using the pressure maximum pressure

JCS - 02 h 50-350 kg/cm2 410 kg/cm2

JCS - 02 n 30-210 kg/cm2 210 kg/cm2

JCS - 02 nl 15 to 60 kg/cm2 210 kg/cm2

JCS - 02 NLL 5-60 kg/cm2 210 kg/cm2

WMAP type pressure relay

When hydraulic system pressure to set pressure, WMAP pressure relay can create a connection to disconnect the electrical signals

When the liquid in the system fell below the selected valve set pressure when the original form of electrical signals will be reset

System of liquid pressure acting on the piston (1) make the work for the spring (2) on the base of once you reach the set pressure, the piston is pushed forward, thereby, acting on the micro switch (3) to connect or disconnect.

Pressure is set by turn the adjusting nut (4), clockwise (set pressure increases.

The pressure relay is suitable for the use of hydraulic oil or similar lubrication characteristics of hydraulic system

WMAP type pressure relay main features

Assembly location Any position

Mounting surface roughness Ra0.4 precision, flatness 0.01/100 (ISO 1101 standard)

The environment temperature from 20 ℃ to + 70 ℃

The oil type hydraulic oil meet DIN51524... 535

Recommended when the viscosity of 40 ℃ for 15-100 was/s (ISOVG15 ~ 100)

Oil cleanliness ISO19/16 standards, recommendations for 25 microns and beta 25 p 75 the oil filter

The oil temperature T 80 ℃ or less; If T 60 ℃ or higher to choose/PE sealing

Pressure relay PS - 02 instructions

Pressure relay PS - 02 as part of the valve, the valve inside micro switch, induction from hydraulic system pressure conveying electrical signals, to the electromagnetic directional valve or electric motor to make it change direction or warning, closed circuit, in order to achieve the effect of system protection.

Pressure relay PS - 02 product model specifications

Model Rated Rated pressure Max Weight Weight (kg)

PS - 02 15 to 60 kg/cm2 70 0.55 kg/cm2

Pressure relay JCD series is introduced

JCD series pressure relay as part of the valve, the valve inside micro switch, induction from hydraulic system pressure conveying electrical signals, to the electromagnetic directional valve or electric motor switch to change direction or warning, closed circuit, in order to achieve the effect of system protection.

Pressure relay JCD model

Type Model Rated Rated maximum pressure Max Weight Weight (kg)

JCD - 02 26 s 4-0.66 kg/cm2 70 kg/cm2