Electromagnetic flow control valves' using taboo

The electromagnetic flow control valve is also called the lifting electromagnetic directional valve, which consists of an electromagnet and a reversing valve. The electromagnet force is amplified by the lever connection, and the electromagnet push rod displacement makes the valve core change direction. The sealed form USES standard steel ball parts as seat core, ball and seat contact seal.

 

 

Note: the electromagnetic flow control valve is mostly used as pilot control valve in the hydraulic system, which can be used as the direction control of other actuators in the small flow hydraulic system.

 

 

1) electromagnetic flow control valve has good sealing, quick reaction speed, high pressure of use, strong adaptability to working medium and strong anti-pollution ability.

 

 

2) the application of the electromagnetic flow control valve is basically the same as that of the electromagnetic directional control valve. In the small flow system, the control system's commutation and start-stop are used as the pilot valve in the large flow system. The electromagnetic flow control valve has a significant advantage in the pressure protection system.

 

 

At present, the electromagnetic flow control valve only has two valves, requires two two valve to form a three valve.

 

 

Note: two two tee electromagnetic flow control valve may not pose as a variety of slide valve function of general electromagnetic directional valve components, this makes the application of electromagnetic flow control valve is limited by certain.

The above:Constant pressure electric check valve